Specifications
Chapter 2 60
Using Worksheets
WORKSHEETS FOR PCS1900
NOTE
Each time a test procedure is selected, the parameters list assumes the
values deļ¬ned by that procedure.
34 TX in-channel sweep test step channel chann. no. 149.00
35 TX in-channel sweep test stop channel chann. no. 810.00
36 TX power level step for peak power pcl 4.00
37 TX power level sweep test start channel chann. no. 512.00
38 TX power level sweep test step channel chann. no. 149.00
39 TX power level sweep test stop channel chann. no. 810.00
40
TX ORFS mod [0.1, 0.2, 0.25, 0.4, 0.6]
2
XXXXX 11111.00
41
TX ORFS modulation [1, 1.2, 1.4, 1.6]
2
XXXX 11111.00
42
TX ORFS ramp offsets [0.4, 0.6, 1.2, 1.6]
2
XXXX 1111.00
43
TX ORFS ramping measurement averages
2
number 1.00
44 TX ORFS modulation measurement
averages
2
number 1.00
45 TX phase/freq measurement averages number 1.00
46 TX current limit Amperes 3.00
47 CP system [0=GSM900, 1=DCS1800,
2=PCS1900, 3=E-GSM]
0, 1, 2 or 3 2.00
48 TX minimum power level pcl 10
49 TX power level control for TEST_08 pcl 5
1 Not available on HP/Agilent 8922E
2 HP/Agilent 8922 with Spectrum Analyzer Option 006 only
PCS1900 PARAMETERS worksheet for:
Used? Parm
no.
Description Units PCS1900
default
value
Value