Specifications

Chapter 2 55
Using Worksheets
WORKSHEETS FOR DCS1800
NOTE Each time a test procedure is selected, the parameters list assumes the
values defined by that procedure.
34 TX in-channel sweep test step channel chann. no. 187.00
35 TX in-channel sweep test stop channel chann. no. 885.00
36 TX power level step for peak power pcl 4.00
37 TX power level sweep test start channel chann. no. 512.00
38 TX power level sweep test step channel chann. no. 187.00
39 TX power level sweep test stop channel chann. no. 885.00
40 TX ORFS modulation [0.1, 0.2, 0.25, 0.4,
0.6]
XXXXXX 111111.0
41 TX ORFS modulation [1, 1.2, 1.4, 1.6] XXXXX 11111.00
42 TX ORFS ramping offsets [0.4, 0.6, 1.2, 1.6] XXXX 1111.00
43 TX ORFS ramping measurement averages number 1.00
44 TX ORFS modulation measurement
averages
number 1.00
45 TX phase/freq measurement averages number 1.00
46 TX current limit Amperes 3.00
47 CP system [0=GSM900, 1=DCS1800,
2=PCS1900]
0, 1 or 2 1.00
48 TX minimum power level for DCS1800 pcl 10.00
1 Not available on HP/Agilent 8922E
DCS1800 PARAMETERS worksheet for:
Used? Parm
no.
Description Units DCS1800
default
value
Value