Specifications
Chapter 2 50
Using Worksheets
WORKSHEETS FOR GSM900
NOTE
Each time a test procedure is selected, the parameters list assumes the
values deļ¬ned by that procedure.
34 TX in-channel sweep test step channel chann. no. 62.00
35 TX in-channel sweep test stop channel chann. no. 124.00
36 TX power level step for peak power pcl 4.00
37 TX power level sweep test start channel chann. no. 1.00
38 TX power level sweep test step channel chann. no. 62.00
39 TX power level sweep test stop channel chann. no. 124.00
40 TX ORFS modulation [0.1, 0.2, 0.25, 0.4,
0.6]
1
XXXXXX 111111.00
41
TX ORFS modulation [1, 1.2, 1.4, 1.6]
1
XXXXX 11111.00
42
TX ORFS ramp offsets [0.4, 0.6, 1.2, 1.6]
1
XXXX 1111.00
43
TX ORFS ramping measurement averages
1
number 1.00
44
TX ORFS mod measurement averages
1
number 1.00
45 TX phase/freq measurement averages number 1.00
46 TX current limit Amperes 3.00
47 CP system [0=GSM900, 1=DCS1800,
2=PCS1900, 3=E-GSM]
0, 1, 2 or 3 0.00
48 TX minimum power level pcl 15
49 TX power level control for TEST_08 pcl 10
1 HP/Agilent 8922 with Spectrum Analyzer Option 006 only
GSM900 PARAMETERS worksheet For:
Used? Parm
no.
Description Units GSM900
default
value
Value