Specifications

36 Chapter1
Operating the Agilent Technologies 83212D Software
Printing test results
• F1011A (AC/DC Adapter)
• C2912B (Printer Cable)
• 10833D (0.5m GPIB Cable)
Contact your nearest Sales and Service Office for a list of printers
supported by the Agilent 83212D software.
Optional printer configuration
To limit the number of lines printed to a page:
Step 1. Press and press
Step 2. Select Edit Cnfg from the Test Function field at the bottom of the
screen.
Step 3. Select the Calling Name and use the knob to enter PRINTER (all
capital letters).
Step 4. Select the Address field and enter the Printer address (example 701).
Step 5. Select the Options field and enter the following code:
LN=#,START,END where # is the number of lines on each page, START
causes a form feed at the start of each printout and END causes a form
feed at the end of each printout.
The Options field is located on the Edit Configuration screen
directly below the field used to enter the word PRINTER.
For full details of the Edit Configuration screen, see chapter 7 ,
Screens.
Step 6. Press followed by Run or to restart the Agilent 83212D
software.
NOTE Having modified the Edit Cnfg screen, you must re-start the Agilent
83212D software using Run as opposed to Continue.
CANCEL TESTS
TESTS L1
L1 L2