Specifications

Chapter 1 35

Operating the Agilent Technologies 83212D Software

Printing test results

The printer screen is accessed from the opening screen by selecting the

Test Procedure Menu.

1. Selecting softkey PRINTER or reveals the current printer

settings.

2. By setting each ﬁeld, the conﬁguration can be altered to suit your

printer. Turn the knob to highlight a printer parameter, then push

the knob to alter its setting.

3. Select or select PREVIOUS to return to main menu.

Figure 1-16 Printer Conﬁguration Screen

NOTE

Setting the PRINTER parameter to ON causes results to be printed when

a test is run. This ﬁeld is also available on the Sequence Menu.

GPIB, RS-232 and Centronics parallel printer interfaces are all

supported by the Agilent 83212D software.

NOTE

If your HP/Agilent 8922 does not have a Centronics interface port, you

can use the following accessories to provide a Centronics interface

capability:

• ITEL-45CH (Centronics GPIB Converter)