Specifications

34 Chapter1
Operating the Agilent Technologies 83212D Software
Saving test procedures to an SRAM memory card
Step 1. Select Procedure and, using the knob on the front panel of the HP/
Agilent 8922 to identify the relevant letter, enter a name for the Test
Procedure. Select Done from the choices menu when you have
completed this task.
NOTE If you are creating a Dual-Band procedure, then this procedure must be
called DUALBAND and the two procedures for GSM900 and DCS1800
must also exist on the card.
Step 2. Select Card.
Step 3. Select Comment for new procedure and use the front panel knob to
enter a procedure description (this description is saved with the
procedure).
Step 4. Select Current.
Step 5. Select Card.
Step 6. Select Make Procedure (this saves the current procedure to the memory
card).
Press followed by to return to the Test Procedure Menu.
To run the saved procedure see “Running user-defined test procedures”
on page 16.
TEST L1