Specifications

Chapter 1 33
Operating the Agilent Technologies 83212D Software
Saving test procedures to an SRAM memory card
Saving test procedures to an SRAM memory
card
NOTE Your memory card must be initialized before it can be used (see
“Initializing an SRAM memory card” on page 182 for details). Memory
cards are sent from the factory uninitialized.
NOTE To create your own Dual-Band procedure, you must use a separate
memory card. The procedure must be called DUALBAND and the
procedures for GSM900 and DCS1800 must also exist on the memory
card to provide the Dual-Band procedure with the necessary
parameters and specifications for each band.
After running a test program, to save it to an SRAM Memory Card:
Step 1. Press
Step 2. Press
Step 3. Highlight the Test Function field and select Proc Mngr
Step 4. Insert an initialized SRAM Memory Card into the slot on the front of
the HP/Agilent 8922.
Select the following commands described by Figure 1-15 on page 33.
Figure 1-15 Procedure Manager Screen
CANCEL
TESTS