Specifications

Chapter 1 32
Operating the Agilent Technologies 83212D Software
Making your own test procedures
Verifying the modified test procedure will run
Once you have modified a procedure, verify that it will run as follows:
Step 1. Connect your mobile station’s RF output to your HP/Agilent 8922.
Step 2. Press the button on the front panel of the HP/Agilent 8922 to
display the TESTS screen.
Step 3. Select Continue to go to the Edit Procedure screen.
Step 4. Press the button on the front panel of the HP/Agilent 8922 to run
the modified test procedure.
If you encounter problems see chapter 3 , Problem Solving.
If no further modifications are necessary and you want to save the test
procedure to a memory card, see “Saving test procedures to an SRAM
memory card” on page 33.
NOTE If you do not save the procedure to a memory card, and another
procedure is selected or a ROM program is run, the procedure you have
defined is over-written.
To printout test results, or get a listing of tests, specifications, or
parameters, see “Printing test results” on page 35.
TEST
L2