Specifications

Chapter 1 25
Operating the Agilent Technologies 83212D Software
Making your own test procedures
Procedure development – edit procedure
The Procedure Development screen is used when running a modified
test procedure (for example, during procedure development) which has
not yet been stored on an SRAM Memory card.
To access the Procedure Development screen pressing or select
Edit Proc from the Sequence Menu.
To save a modified test procedure, see “Saving test procedures to an
SRAM memory card” on page 33.
Figure 1-11 Procedure Development Screen on the Agilent 83212D
NOTE If you do not save the procedure to a memory card, and another
procedure is selected or a ROM program is run, the procedure you have
defined is over-written.
• You must have loaded a Pre-Defined Test Procedure to have access to
test data on the TESTS screen. See “Pre-defined test procedures” on
page 14.
• To save your Test Procedure, you must have an initialized SRAM
memory card available (see “Initializing an SRAM memory card” on
page 182.)
• The worksheets at the end of this chapter will help you make a test
procedure.
L2