Specifications

Chapter 1 21
Operating the Agilent Technologies 83212D Software
Selecting a test sequence — Test Sequence menu
Quick Test
The Quick Test provides a general confidence test of the mobile.
Figure 1-9 Output of Quick Test Sequence on the Agilent 83212D
The results of the Quick Test procedure are displayed on the screen as
they are completed. At the end of the test the call is not terminated.
This allows you the option of quickly re-checking one or more of the
tests.
Individual
This final sequence option lets you access and run an individual test.
This is done either to verify a suspect failure or as a post-repair check.
A full list of the library tests available are shown in Table 1-1 on
page 22.