Specifications

Chapter 1 18
Operating the Agilent Technologies 83212D Software
Selecting a test sequence — Test Sequence menu
Pausing and aborting tests
At various times throughout a test, pressing softkey pauses
testing, and pressing softkey aborts the current test. Two softkey
labels, marked 1 and 2, on the top right of the screen indicate when
these softkeys are active.
Full Test
If you select any of the Pre–Defined procedures (GSM900, Dual-Band
DCS1800 or PCS1900), a Full Test option is available on the sequence
menu. Selecting this sequence executes ten of the fifteen available tests
as shown in Table 1-1 on page 22.
If you select a user–defined test procedure, the procedure name appears
as the first option on the sequence menu. For example, if you select the
user-defined test procedure QA_TEST from the procedure menu, the
first option on the sequence menu is QA_TEST. Selecting this option
runs the procedure as stored on the card.
L1
L2