Specifications

Chapter 1 17

Operating the Agilent Technologies 83212D Software

Selecting a test sequence — Test Sequence menu

Selecting a test sequence — Test Sequence

The Agilent 83212D GSM Mobile Station Test Software includes the

following four Test Sequences that are designed to meet most test

requirements.

• Full Test (or name given by user deﬁnition)

• Flowchart

• Quick Test

• Individual

These test sequences apply to all types of mobile testing (GSM900,

Dual-Band, DCS1800 and PCS1900) using the HP/Agilent 8922.

The Test Sequence Menu lets you run various test sequences using

the speciﬁcations and parameters deﬁned in the selected procedure. At

this point pressing allows you to return to the Test Procedure

Menu and select another procedure.

Figure 1-6 Sequence Menu Screen on the Agilent 83212D

To initiate the appropriate sequence select Full Test, Flowchart or

Quick Test. Selecting Individual leads to a sub menu from which

you can use the knob to select and run one of the ﬁfteen individual tests

listed in Table 1-1 on page 22. Pressing exits this sub menu

without executing a test.