Specifications

Chapter 1 15
Operating the Agilent Technologies 83212D Software
Selecting a test procedure — Test Procedure menu
Accessing the Test Procedure menu
The Test Procedure Menu shown in Figure 1-5 on page 14 is the first
screen displayed when you run the Agilent 83212D software. To return
to this screen at any point, Press - , then
followed by Run Test to restart software. If you have
problems, see “Loading the Agilent 83212D software from memory
card” on page 8.
Test Procedure menu
Any test procedures on the current card are displayed on this menu. If
the card has been changed since running the software, you must use the
READ CARD option to update the menu as subsequently described.
Turn the knob on the front panel of the HP/Agilent 8922 to highlight a
test procedure, then push the knob to select the procedure. When you
select a procedure the Sequence menu is displayed and you can select
a test (see “Selecting a test sequence — Test Sequence menu” on
page 17).
To get a summary of how to test a mobile press to access the
Procedure Help screen (see Figure 1-4 on page 13).
To set up a printer to output test results (see “Printing test results” on
page 35) press to access the Printer Configuration Menu.
Running procedures from another card
The READ CARD option allows you to run user–defined procedures from
another card as follows:
Step 1. Highlight READ CARD on the Procedure Menu.
Step 2. Insert the card containing desired procedures in slot.
Step 3. Push the knob on the front panel of the HP/Agilent 8922 to update list
of available procedures.
NOTE The Agilent 83212D software displays up to 38 procedures from a single
card. If there are too many procedures to display on one screen, a Next
Page option allows you to view the remaining procedures on the card.
For details on how to create your own test procedures and save them to
a memory card, see “Making your own test procedures” on page 24 and
“Saving test procedures to an SRAM memory card” on page 33.
SHIFT CANCEL
TESTS
L1
L1
L2