Specifications

Chapter 1 12

Operating the Agilent Technologies 83212D Software

Testing a mobile

Connect the GSM900 mobile station RF output to the HP/Agilent 8922

RF IN/OUT connector (DCS1800, PCS1900 and Dual-Band mobile

stations require an HP/Agilent 83220—see “Testing a DCS1800,

PCS1900 or Dual-Band mobile” on page 7).

Step 1. Select the desired Procedure from the Procedure Menu screen (see

Figure 1-5 on page 14) and push the knob on the front panel of the HP/

Agilent 8922.

Step 2. Push the knob again to begin testing.

Step 3. Power on the mobile. Once the mobile ﬁnds service, press to

continue.

Step 4. Now follow the instructions given on the top lines of the HP/Agilent

8922 screen.

Step 5. Select to abort testing.

Once testing is completed:

Step 1. Press to repeat the test.

Step 2. Press to return to the menu.