Specifications

ii
Notices
Subject matter THE MATERIAL CONTAINED IN THIS DOCUMENT IS SUBJECT
TO CHANGE WITHOUT NOTICE. AGILENT TECHNOLOGIES
MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. AGILENT TECHNOLOGIES INC. SHALL
NOT BE LIABLE FOR ERRORS CONTAINED HEREIN OR FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS
MATERIAL.
Ordering
information
To order this manual, call or write to your nearest Agilent Technologies
Sales Office. Within the USA, it is better to order directly from the
Agilent Support Materials Organization in Roseville, California. Ask
your nearest Agilent office for information and forms for the “Direct
Order System”.
Warranty
Certification Agilent Technologies Inc. certifies that this product met its published
specifications at the time of shipment from the factory. Agilent
Technologis further certifies that its calibration measurements are
traceable to the United States National Institute of Standards and
Technology, to the extent allowed by the Institute’s calibration facility,
and to the calibration facilities of other International Standards
Organization members.
Warranty This Agilent Technologies instrument product is warranted against
defects in material and workmanship for a period of one year from date
of shipment. During the warranty period, Agilent Technologies will at
its option, either repair or replace products which prove to be defective.
For warranty service or repair, this product must be returned to a
service facility designated by Agilent Technologies. Buyer shall prepay
shipping charges to Agilent Technologies and Agilent Technologies
shall pay shipping charges, duties, and taxes for products returned to
Agileeent Technologies from another country.
Agilent Technologies warrants that its software and firmware
designated by Agilent Technologies for use with an instrument will
execute its programming instructions when properly installed on that
instrument. Agilent Technologies does not warrant that the operation