Specifications

Chapter 7 174
Screens
TESTS (Edit Configuration)
TESTS (Edit Configuration)
Figure 7-5 TESTS (Edit Configuration) screen
1. Addr This field is used to enter the select code and address of the device
described in the Calling Name field.
When using the GPIB bus, this field entry must be a three digit number
(for example, 701). When using a serial device, enter “9” in this field.
For a printer connected to the parallel port, use “15”.
2. Calling Name This field is used to enter the name of a peripheral device. The calling
name must be entered in upper case, with a space inserted between
words.
Examples of calling names are:
• PRINTER
• POWER SUPPLY
To enter a calling name:
Step 1. Select the Calling Name field. (An alpha/numeric list of characters
appears in the lower-right corner of the screen.)
Step 2. Use the knob on the front panel of the HP/Agilent 8922 to select
characters (upper-case only).
Step 3. Select Done when you are finished.