Specifications

Chapter 7 168
Screens
TESTS (Edit Sequence)
TESTS (Edit Sequence)
Figure 7-2 TESTS (Edit Sequence) screen
1. All Chans? This field is not used by the Agilent 83212D software.
2. Delet Stp This field deletes the currently selected test.
3. Edit Freq This field is not used by the Agilent 83212D software. (Firmware
versions of 5.00 and above will show Edit Parm in this position)
4. Edit Spec This field is used to enter test limits.
5. Insrt Stp This field inserts a duplicate of the currently selected test.
6. Print All This field outputs a listing of the currently selected tests to a printer.
See “Printing test results” on page 35 for details.
7. Step# This field selects and displays the step numbers of all tests in a test
procedure. These numbers determine the test sequence.
8. Test Function This field selects the screens used in the tests subsystem. Choices are:
• Edit Seqn is used to select tests and test sequence.
• Edit Freq is not used by the Agilent 83212D software.
• Edit Spec is used to enter test limits.
• Edit Parm is used to enter test parameters.