Specifications

Chapter 7 164
Screens
TESTS
TESTS
Figure 7-1 TESTS screen
1. Comment This field allows descriptions of test procedures to be displayed on the
CRT display and printouts. Comments are saved with test procedures.
To enter a comment:
Step 1. Select the Comment field (an alphanumeric list of characters appears in
the lower-right corner of the screen).
Step 2. Use the knob on the front panel of the HP/Agilent 8922 to select
characters (two lines of comments, 50 characters in length, may be
entered).
Step 3. Select Done when you are finished.
2. Continue This field continues a program after it has been paused. Pressing the
CANCEL key pauses a program.
3. Edit freq This field is not used in GSM/DCS Mobile Station testing (firmware
versions of 5.00 and above will show Edit Parm in this position).
4. Edit seqn This field is used to edit the sequence of tests in a procedure.
5. Edit spec This field is used to enter test specification limits in a procedure.
6. Library This field displays the name of the library file.