Specifications

Chapter 6 155
Test Parameters
Parameter descriptions
36 TX Power Level Step for Peak Power
This parameter allows you to choose the power-control level (PCL) step
size for peak-power measurements. Testing will begin at the PCL set by
parameter 31 TX default power control level. The range is:
• 1 to 19 for GSM and E-GSM
• 1 to 17 for DCS
• 0 to 15 for PCS
Default value The default power-control level step size is 4.
Example If you wanted to test transmitter peak power at power control levels of
3, 5, 7, 9, 11, 13, and 15, you would enter 3 in the value field for
parameter TX default power control level, and you would enter
2 in the step size value field.
NOTE When testing DCS1800 mobiles, the minimum power level is set by
parameter 48.