Specifications

Chapter 6 144
Test Parameters
Parameter descriptions
8 CP Mobile Network Code
This parameter specifies the mobile station’s network code (MNC). The
combination of the MNC and MCC (mobile station country code) make
up the private-land mobile network (PLMN). A mobile station will not
“camp on” to the HP/Agilent 8922 if its test SIM PLMN does not match
parameters CP mobile country code and CP mobile network
code. The range is 0 to 99.
Default value The default MNC is 1.
Example If you want to use an MNC number of 54, you would enter 54 in the
value field.
9 CP Control Chan Type
This parameter selects the type of control channel the HP/Agilent 8922
will use when establishing a link with the mobile station.
Two types of control channels are available:
• SD/4 – uses a stand-alone dedicated control channel (SDCCH) on the
same physical channel as the broadcast channel (BCH).
• SD/8 – uses a stand-alone dedicated control channel (SDCCH) on a
different physical channel than the broadcast channel.
Default value The default setting is 1 (SD/4 channel configuration) for GSM900,
DCS1800 and PCS1900.
Example If you want to use the SD/4 format, you would enter 1 into the value
field. If you want to use the SD/8 format, you would enter 0 into the
value field.
10 CP Test With Ciphering
This parameter controls whether the mobile is tested with ciphering on
or off. To test with ciphering requires that the HP/Agilent 8922 has
option 005 installed.
Default value The default Ciphering setting is 0 (no).
Example If you want ciphering turned on, you would enter 1 in the value field.