Specifications

Chapter 6 142
Test Parameters
Parameter descriptions
2 AE IMSI Number [digits 6-15]
This parameter sets the last ten (of 15) digits in the International
Mobile Subscriber Identity (IMSI) number.
NOTE If you leave the IMSI field at its default setting, the software will
prompt you to make a mobile station originated call, and the HP/
Agilent 8922 will acquire the SIM card’s IMSI number over the GSM
link.
If you enter the IMSI number from the mobile station’s SIM card, the
HP/Agilent 8922 will use it to page the mobile station during a base
station originated call. If the IMSI you entered is incorrect, an error
message will be displayed, and you will have to make an emergency
(112) call to establish the link.
Default value The default value for the IMSI number is all 0’s.
Example If the last ten digits in your mobile’s IMSI number are 0123456789, you
would enter 123456789 into the value field. Leading 0’s do not have to
be entered.
3 CP Base Station Color Code
This parameter sets the base station’s color code (BCC). The range is 0
to 7.
Default value The default BCC is 5.
Example If you want to use a BCC of 4, you would enter 4 into the value field.
4 CP Public Land Mobile Network Color Code
This parameter sets the public-land mobile Network Color Code (NCC).
The range is 0 to 7.
Default value The default NCC is 1.
Example If you want to use an NCC number of 2, you would enter 2 into the
value field.