Specifications

Chapter 6 141
Test Parameters
Parameter descriptions
Parameter descriptions
1 AE IMSI Number [digits 1-5]
This parameter sets the first five (of 15) digits in the International
Mobile Subscriber Identity (IMSI) number.
NOTE If you leave the IMSI field at its default setting the software prompts
you to make a mobile station originated call, and the HP/Agilent 8922
will acquire the SIM card’s IMSI number over the GSM link.
If you enter the IMSI number from the mobile station’s SIM card, the
HP/Agilent 8922 will use it to page the mobile station during a base
station originated call. If the IMSI you entered is incorrect, an error
message will be displayed, and you will have to make an emergency
(112) call to establish the link.
Default value The default value for the IMSI number is all 0’s.
Example If the first five digits in your mobile’s IMSI number are 00101, you can
enter 101 into the value field. The display will show 101.000000.
Leading 0’s do not have to be entered.
The first three digits of the IMSI represent the MCC (mobile country
code). The next 2 are the MNC (mobile network code).