Specifications

Chapter 6 139
Test Parameters
Parameter types
List of Parameters
1 AE IMSI (digits 1- 5)
2 AE IMSI Number (digits 8-15)
3 CP Base Station Color Code
4 CP Public Land Mobile Network Color Code
5 CP Serving Cell (BCH) ARFCN
6 CP Local Area Code
7 CP Mobile Country Code
8 CP Mobile Network Code
9 CP Control Chan Type [0=SD/8, 1=SD/4]
10 CP Test With Ciphering [0=no 1=yes]
11 CP Delay(+) or Advance(−) for Trigger
12 RT Default Traffic Channel [ARFCN 1-124]
13 RT Timeslot for TCH/FS [2, 3, 4, 5, 6]
14 RT TCH [0=static 1=hopping 3 freqs]
15 RT Cell TCH H.O. [0=inter 1=intra]
16 RT External Pad and Cable Loss
17 RT Nominal Supply Voltage
18 RT Test Set Reference Offset (HP 8922G only)
19 RT Report TCH Uplink Errors (0=off 1=on)
20 RX RF Level for Signalling
21 RX Loopback Delay [0=autoset XX=value]
(frames)
22 RX BER/FER Results [0=count 1=% 2=ppm]
23 RX RF Level TCH/FS Reference Sensitivity
24 RX Bits to Test Reference Sensitivity Ib
25 RX Bits to Test Reference Sensitivity II
26 RX Ref Sens Sweep Test Start Channel
27 RX Ref Sens Sweep Test Step Channel
28 RX Ref Sens Sweep Test Stop Channel
29 RX Usable Input Level Range RF Level
30 RX Bits to Test Usable Input Level II
31 TX Default Power Control Level
32 TX Select In-Channel Tests
33 TX In-Channel Sweep Test Start Channel
34 TX In-Channel Sweep Test Step Channel
35 TX In-Channel Sweep Test Stop Channel
36 TX Power Level Step for Peak Power
37 TX Power Level Sweep Test Start Channel