Specifications

Chapter 5 129
Test Specifications
30 TX RACH Phase Error (peak)
30 TX RACH Phase Error (peak)
Description This specification sets the upper limit for the mobile station’s peak
phase error while transmitting a RACH (Random Access Channel)
burst.
If a selected limit is exceeded, an “F” (for fail) will be displayed next to
the TX RACH phase error peak measurement result.
Default values The default limit is 20
°.
Example If you want your test procedure to report a failure when the phase error
for a RACH exceeds 30
° you would enter 0 in the lower-limit column
and 30 in the upper-limit column. Limits are entered in units of
degrees.