Specifications

Chapter 5 122
Test Specifications
20 TX Average Phase Error (RMS)
20 TX Average Phase Error (RMS)
Description This specification sets the upper limit for the mobile station
transmitter’s average RMS phase error, expressed in degrees.
If the limit is exceeded, an “F” (for fail) is displayed next to the TX
phase error RMS measurement.
Default value The default value for the upper limit is 5
° peak.
Example If you want your test procedure to report a failure if the transmitter
average phase error exceeds 6 degrees, you would enter 0 in the
lower-limit column and 6 in the upper-limit column. Values are entered
in degrees.