Specifications

Chapter 5 121
Test Specifications
19 TX Average Phase Error (peak)
19 TX Average Phase Error (peak)
Description This specification sets the upper limit for the mobile station
transmitter’s average peak phase error, expressed in degrees.
If the limit is exceeded, an “F” (for fail) is displayed next to the TX
phase error peak measurement.
Default value The default value for the upper limit is 20
° peak.
Example If you want your test procedure to report a failure if the transmitter
average peak phase error exceeds 25 degrees, you would enter 0 in the
lower-limit column and 25 in the upper-limit column. Values are
entered in degrees.