Specifications

Chapter 4 100
Tests
TEST_12 MS Quick Test
Test conditions that cannot be modified
• Receiver reference sensitivity type II bits are set to 10000.
• Power levels are tested at the default power control level and at
power-level settings:
— 7, 11, and 15 for GSM900 and E-GSM
— 3, 7 and 10 for DCS1800/PCS1900
11 CP delay(+) or advance(−) for trigger T 0.0 0.0 0.0
12 RT default traffic channel [ARFCN
1-124]
chan.no. 62.0 699.0 699.0
16 RT external pad and cable loss dB 0.0 0.0 0.0
20 RX RF level for signalling dBm −60.0 −60.0 −60.0
22 RX BER/FER results [0=count 1=%
2=ppm]
0, 1, or 2 1.0 1.0 1.0
23 RX RF level TCH/FS reference
sensitivity
dBm −102.0 −100.0 −102.0
31 TX default power control level pcl 7.0 3.0 3.0
32 TX minimum power level for DCS1800 pcl 0.0 10.0 10.0
47 CP System [0=GSM900, 1=DCS1800,
2=PCS1900, 3=E-GSM]
0, 1, 2 or 3 0.0 1.0 2.0
Parm
no.
Description Units GSM900
Default
Value
DCS1800
Default
Value
PCS1900
Default
Value