User`s guide

5-5
Audio Frequency Commands (Measure Subsystem)
DCFM
DCFM
Description Sets the DC FM Level MEASurement attributes. Queries the DC Level MEASurement
result for AF Analyzer inputs (AFAN:INP) that are units of Hertz.
GPIB unit is HZ.
Display units are KHZ, HZ; default unit is HZ.
Syntax MEASure:AFRequency:DCFM?
MEASure:AFRequency:DCFM[:MM] | [:AVG] | [:MET]
Options Refer to Appendices D, F and G.
DCVolts
Description Sets the DC Volts MEASurement attributes. Queries the DC Volts MEASurement result for
AF Analyzer inputs (AFAN:INP) that are units of DC Volts.
GPIB unit is V.
Display units are dBm, V, mV, uV, dBuV, W; default unit is V.
Syntax MEASure:AFRequency:DCVolts?
MEASure:AFRequency:DCVolts[:MM] | [:AVG] | [:MET]
Options Refer to Appendices D, F and G.
DISTortion
Description Sets the DISTortion MEASurement attributes. Queries the DISTortion MEASurement
result.
GPIB and Display units are dB and percent (PCT).
Default HP-IB and display unit is PCT.
Syntax MEASure:AFRequency:DISTortion?
MEASure:AFRequency:DISTortion[:MM] | [:AVG] | [:MET]
Options Refer to Appendices D, F and G.