User`s guide

3-8
AF Analyzer Subsystem
RANGing
RANGing
Description Selects/queries the RANGing (Gain Cntl) STATe.
Syntax AFANalyzer:RANGing?
AFANalyzer:RANGing <string>
Options ’AUTO’ | ’HOLD’
Where;
• AUTO results in gain selections being made automatically based on audio level.
• HOLD causes all gain selections to maintain their present state for either manual
selection or until AUTO is selected.
SPEaker:MODE
Description Selects/queries the SPEaker ALC MODE.
Syntax AFANalyzer:SPEaker:MODE?
AFANalyzer:SPEaker:MODE <string>
Options ’ON’ | ’OFF’
NOTE This command is not available for the Agilent 8922S.
SPEaker:VOLume
Description Selects/queries the SPEaker VOLume.
Syntax AFANalyzer:SPEaker:VOLume?
AFANalyzer:SPEaker:VOLume <string>
Options ’POT’ | ’OFF’
Where;
• POT means the SPEaker VOLume is controlled via the front panel VOLUME control.
• OFF means the SPEaker VOLume is turned off, independent of the front panel
VOLUME control.
NOTE This command is not available for the Agilent 8922S.