User`s guide

3-6
AF Analyzer Subsystem
FILTer1
FILTer1
Description Selects/queries the AF Analyzer Filter 1.
Syntax AFANalyzer:FILTer1?
AFAN:FILT1?
AFANalyzer:FILTer1 <string>
AFAN:FILT1 <string>
Options ‘20HZ HPF’ | ’50HZ HPF’ | ’300HZ HPF’
FILTer2
Description Selects/queries the AF Analyzer Filter 2.
Syntax AFANalyzer:FILTer2?
AFAN:FILT2?
AFAN:FILT2 <string>
AFANalyzer:FILTer2 <string>
Options ’300HZ LPF’ | ’3KHZ LPF’ | ’15KHZ LPF’| ’>99KHZ LP’
GTIMe
Description Sets/queries the AF ANalyzer Gate TIMe (AF Cnt Gate).
Default GPIB unit is seconds (S).
Default display unit is milli-seconds (MS).
Syntax AFANalyzer:GTIMe?
AFANalyzer:GTIMe <real [units]> | [:FNUM]
Options Refer Appendix B.