User`s guide

3-5
AF Analyzer Subsystem
DETector:PKLocation
DETector:PKLocation
Description Selects/queries the PeaK DETector Location.
Syntax AFANalyzer:DETector:PKLocation?
AFANalyzer:DETector:PKLocation <string>
Options ’FILTERS’ | ’DE-EMP’
DETector:SETTling
Description Selects/queries the DETector SETTling mode.
Syntax AFANalyzer:DETector:SETTling?
AFANalyzer:DETector:SETTling <string>
Options ‘SLOW’ | ‘FAST’
Where;
• SLOW is useful for low frequency audio measurements.
• FAST is useful for higher frequency audio measurements.
ELResistor
Description Sets/queries the External Load Resistor assumed for measuring watts of power into an
external load resistor. Default GPIB and display unit is Ohms.
Syntax AFANalyzer:ELResistor?
AFANalyzer:ELResistor <real [units]> | [:FNUM]
Options Refer Appendix B.