User`s guide

E-4

Appendix E - [:MM-MOD] - Measurement Fields (less UNITs, DUNits, AUNits)

Commands

REFerence:

STATe

REFerence:STATe?

REFerence:STATe ON | OFF | 1 | 0

Sets/queries the REFerence STATe. Note: ON = 1 and OFF = 0.

REFerence

[:VALue]

REFerence[:VALue]?

REFerence[:VALue] [<numeric value>]

Sets/queries the measurement REFerence VALue. If no <numeric value> is speciﬁed, then

the REFerence VALue will be set to the current measurement result.