User`s guide

E-3
Appendix E - [:MM-MOD] - Measurement Fields (less UNITs, DUNits, AUNits)
Commands
Commands
STATe STATe?
STATe ON | OFF | 1 | 0
Selects/queries the STATe of the measurement to be ON or OFF.
Note: ON = 1 and OFF = 0
HLIMit HLIMit
High LIMit measurement information.
HLIMit:
EXCeeded
HLIMit:EXCeeded?
Queries whether the High LIMit for the measurement was EXCeeded.
HLIMit:
RESet
HLIMit:RESet
RESet the High LIMit exceeded state so that new limit data can be acquired.
HLIMit:
STATe
HLIMit:STATe?
HLIMit:STATe ON | OFF | 1 | 0
Sets/queries the High LIMit STATe. Note: ON = 1 and OFF = 0.
HLIMit
[:VALue]
[:VALue]?
[:VALue] <numeric value>
Sets/queries the measurement High LIMit VALue.
LLIMit LLIMit
Low LIMit measurement information.
LLIMit:
EXCeeded
LLIMit:EXCeeded?
Queries whether the Low LIMit for the measurement was EXCeeded.
LLIMit:
RESet
LLIMit:RESet
RESet the Low LIMit exceeded state so that new limit data can be acquired.
LLIMit:
STATe
LLIMit:STATe?
LLIMit:STATe ON | OFF | 1 | 0
Sets/queries the Low LIMit STATe. Note: ON = 1 and OFF = 0.
LLIMit
[:VALue]
[:VALue]?
[:VALue] <numeric value>
Sets/queries the measurement Low LIMit VALue.
REFerence REFerence
Measurement REFerence information.