User`s guide

40-5
Trigger Subsystem
BETest:MODE
BETest:MODE
Description Selects/queries the Bit Error Test measurement TRIGger MODE.
Syntax TRIGger:BETest:MODE?
TRIGger:BETest:MODE <string>
Options ’RUN’ | ’STOP’
Where;
• RUN initializes the Bit Error Test measurements to start and starts all Bit Error Test
measurements.
• STOP Bit Error Test measurements - this is useful in aborting long Bit Error Test
measurements.
DDEMod:ADJMode
Description Selects/queries the Digital DEMod TRIGger ADJust Mode. Trigger adjust mode enables
the user to change TRIG:DEL even while Demod is armed. Some Demod triggers will be
missed while changing trigger delay.
Syntax TRIGger:DDEMod:ADJMode?
TRIGger:DDEMod:ADJMode <string>
Options ’ENABLED’ | ’DISABLED’
DDEMod:ASTate
Description Selects/queries the Arm STate of the Digital DEMod TRIGger. Must be on digital demod,
cell configuration or cell control screens to Arm Digital Demod.
Syntax TRIGger:DDEMod:ASTate?
TRIGger:DDEMod:ASTate <string>
Options ’ARM’ | ’DISARM’