User`s guide

39-7
Tests Subsystem
EXECution:RUN
EXECution:RUN
Description Sets/Queries the test running mode. It enables the test to be run continuously or paused after
each test.
Syntax TESTs:EXECution:RUN?
TEST:EXEC:RUN?
TESTs:EXECution:RUN <string>
TEST:EXEC:RUN <string>
Options ‘CONTINUOUS’ | ‘SINGLE STEP’
Where;
CONTINUOUS All tests run in sequence. Testing pauses only if the operator is
required to interact with the UUT or Agilent 8922M/S; interaction
such as changing UUT channels, changing audio level, and so forth,
cause testing to pause.
SINGLE STEP The program stops running at the completion of each test. The test-
system operator is prompted to select Continue to proceed with
testing.
FREQuency?
Description Queries the test RX and TX frequency.
Syntax TESTs:FREQuency? <n>
TEST:FREQ? <n>
Options Where <n> is the channel number of the frequency being queried. <n> is from 1 to 50