User`s guide

37-4
Status Subsystem
Status Subsystem - Status Byte
Event register bit
definitions
1 - Measurement Limit(s) Exceeded
8 - EMMI Status Register Event Summary
14 - OverPower Protection Tripped
Hardware 2 Status Register
Condition register bit
definitions
2 - RF Frequency - change RF Gen Freq
1 - RF Src Level setting - change Ref Level, Input Port or Attenuator
(if using ”Hold”).”
0 - RF Analyzer Level setting - change RF Gen Amplitude, Output
Port or Atten Hold (if on).”
Questionable Data/Signal Status Register
The QUEStionable status register set contains bits which give an indication of the quality
of various aspects of the signal/data.
A bit set in the condition register indicates that the data currently being acquired or
generated is of questionable quality due to some condition affecting the parameter
associated with that bit.
Condition register bit
definitions
7 - CALibration Register Summary
Standard Event Status Register
Condition register bit
definitions
5 - Command Error
4 - Execution Error
3 - Device Dependant Error
2 - Query Error