User`s guide

36-3
Spectrum Analyzer Commands (Measure Subsystem)
MARKer:FREQuency
MARKer:FREQuency
Description Queries the MARKer FREQuency MEASurement result.
GPIB unit is HZ.
Display units are MHZ, kHZ, HZ;
Syntax MEASure:SANalyzer:MARKer:FREQuency?
MEASure:SANalyzer:MARKer:FREQuency[:MM] | [:AVG]
Options Refer to Appendices D and F.
MARKer:LEVel
Description Queries the MARKer LEVel MEASurement result.
GPIB units are dBm, W.
default unit is dBm.
Display units are dBm, W, V, dBuV;
default unit is dBm.
Syntax MEASure:SANalyzer:MARKer:LEVel?
MEASure:SANalyzer:MARKer:LEVel[:MM] | [:AVG]
Options Refer to Appendices D and F.
TRACe
Description Queries the Spectrum Analyzer TRACe MEASurement result.
Syntax MEASure:SANalyzer:TRACe?
Options Not Applicable.