User`s guide

35-6
Spectrum Analyzer Subsystem
MARKer:POSition
MARKer:POSition
Description Selects/queries the MARKer POSition setting.
Syntax SANalyzer:MARKer:POSition?
SANalyzer:MARKer:POSition <real> | [:FNUM]
Options Refer to Appendix B.
MARKer:RLEVel
Description Sets MARKer and signal to Reference LEVel.
Syntax SANalyzer:MARKer:RLEVel
Options Not Applicable.
RLEVel1
Description Reference LEVel for the RF IN/OUT port.
GPIB units are dBm, Volts (V) and Watts (W);
Default GPIB and display unit is dBm.
Syntax SANalyzer:RLEVel1?
SANalyzer:RLEVel1 <real> | [:FNUM]
Options Refer to Appendix B.
RLEVel2
Description Reference LEVel for the AUX RF IN port.
HP-IB units are dBm, Volts (V) and Watts (W);
Default GPIB and display unit is dBm.
Syntax SANalyzer:RLEVel2?
SANalyzer:RLEVel2 <real> | [:FNUM]
Options Refer to Appendix B.