User`s guide

35-4
Spectrum Analyzer Subsystem
ATTenuator
ATTenuator
Description Selects/queries the input ATTenuator GSM900 and EGSM900 selection. This is only valid
when ATT1:MODE ’HOLD’ is selected, otherwise, automatic attenuator selection is done.
NOTE: This is only valid for CONFigure:RADio
’GSM900’ | ’EGSM’
Syntax SANalyzer:ATTenuator?
SANalyzer:ATTenuator <string>?
Options ’0 dB’ | ’10 dB’ | ’20 dB’ |
’30 dB’ | ’40 dB’
ATTenuator:MODE
Description Selects/queries the ATTenuator1 MODE selection.
Syntax SANalyzer:ATTenuator:MODE?
SANalyzer:ATTenuator:MODE <string>?
Options ’AUTO’ | ’HOLD’
ATTenuator2
Description Selects/queries the input ATTenuator DCS1800 and PCS1900 selection. This is only valid
when ATT2:MODE ’HOLD’ is selected, otherwise, automatic attenuator selection is done.
NOTE: This is only valid for CONFigure:RADio
’DCS1800’ | ’PCS1900’
Syntax SANalyzer:ATTenuator2?
SANalyzer:ATTenuator2 <string>?
Options ’0 dB’ | ‘5 dB’ | ’10 dB’ | ‘15 dB’ | ’20 dB’ |
‘25 dB’ | ’30 dB’ | ’35 dB’