User`s guide

30-4
PULSe On/Off Ratio Subsystem
MARKer:OPOSition:RISE
MARKer:OPOSition:RISE
Description Sets/queries the PULSe Off POSition RISE setting. This is the time (relative to the center
of bit zero) that the amplitude on the amplitude envelope will be measured. The range is -
56.0 us to 0.0 us.
GPIB units are seconds (S), bit periods (T).
default unit is seconds (S),
default display unit is US (micro-second).
Syntax PULSe:MARKer:OPOSition:RISE?
MARKer:OPOSition:RISE <real> | [:FNUM]
Options Refer to Appendix B.
SACalibrate
Description Calibrates the Spectrum Analyzer for making Output RF Spectrum or Pulse On/Off Ratio
measurements. This command is only active when TRIG:MODE[:DSP] = ’SINGLE’.
Syntax PULSe:SACalibrate
Options Not Applicable.