User`s guide

29-4
Output RF Spectrum Commands (Measure Subsystem)
MARKer:TIME
MARKer:TIME
Description Queries the MARKer TIME which is the marker’s position relative to bit zero in the
measured burst. This value is a function of the marker position set or queried by
ORFS:MARK:POS.
GPIB units are seconds (S), bit periods (T);
default unit is seconds (S).
Display units are US (micro-second), T (bit periods);
default unit is US (micro-second).
Syntax MEASure:ORFSpectrum:MARKer:TIME?
MEASure:ORFSpectrum:MARKer:TIME[:MM] | [:AVG]
Options Refer to Appendices D and F.
[:POWer]
Description Queries the Output Spectrum POWer MEASurement result.
Default unit is dB relative (as per GSM rec. 5.05, etc.).
GPIB unit is dB.
Display unit is dB.
Syntax MEASure:ORFSpectrum[:POWer]?
MEASure:ORFSpectrum[:POWer][:MM] | [:AVG]
Options Refer to Appendices D and F.