User`s guide

28-3
Output RF Spectrum Subsystem
FREQuency:OFFSet
FREQuency:OFFSet
Description Sets/queries the Output RF Spectrum FREQuency OFFSet setting. This field is only used
when not making reference measurements. The offset is automatically set to 0.0 kHz when
MODE is set to either RAMP REF or MOD REF.
Default GPIB unit is HZ.
Default display unit is kHZ.
Syntax ORFSpectrum:FREQuency:OFFSet?
ORFSpectrum:FREQuency:OFFSet <real> | [:FNUM]
Options Refer to Appendix B.
MARKer:POSition
Description Sets/queries the Output RF Spectrum MARKer POSition setting. The value is given in units
of divisions from the left side of the trace (0 to 10 divisions).
Syntax ORFSpectrum:MARKer:POSition?
ORFSpectrum:MARKer:POSition <integer> | [:FNUM]
Options Refer to Appendix B.