User`s guide

27-4
Oscilloscope Commands (Measure Subsystem)
MARKer:TIME
MARKer:TIME
Description Queries the MARKer TIME MEASurement which time elapsed from the trigger point to
the current marker position. This value is a function of the marker position set or queried
by OSC:MARK:POS.
GPIB unit is seconds (S);
Display units are S, MS;
default unit is MS.
Syntax MEASure:OSCilloscope:MARKer:TIME?
MEASure:OSCilloscope:MARKer:TIME[:MM] | [:AVG]
Options Refer to Appendices D and F.
TRACe
Description Queries the oscilloscope TRACe MEASurement result.
Syntax MEASure:OSCilloscope:TRACe?
Options Not Applicable.