User`s guide

2-2

GPIB Tutorial and Examples

GPIB Programming Exercises

Before Starting

Power-up the Agilent 8922M/S and carry out the following checks before beginning the

exercise:

❒ On the rear panel, the OPT 001 REF OUT should be connected with a short BNC cable

to the REF IN connector.

❒ Use the front panel knob to select the CONFIG screen. Check the Compatible field is

set to 8922M or 8922S.

❒ On the CONFIG screen, set the GPIB address to 14 and check the GPIB mode is set to

talk&lstn.

❒ Connect the GPIB cable from your computer to the Agilent 8922M/S.

❒ Load a Test SIM (Subscriber ID Module) in the mobile.

❒ Connect a GSM mobile to the Agilent 8922M/S front panel RF IN/OUT connector.

Carry out the following programming exercises, check your program works after each

exercise.