User`s guide

26-3
OSCilloscope Subsystem
CONTrol
CONTrol
Description Selects/queries the OSCilloscope CONTrols - various fields will appear based on the
CONTrol selection.
Syntax OSCilloscope:CONTrol?
OSCilloscope:CONTrol <string>
Options ’MAIN’ | ’TRIGGER’ | ’MARKER’
MARKer:NPEak
Description Causes the OSCilloscope MARKer to move to the lowest Negative PEak displayed.
Syntax OSCilloscope:MARKer:NPEak
Options Not Applicable.
MARKer:PPEak
Description Causes the OSCilloscope MARKer to move to the highest Positive PEak displayed.
Syntax OSCilloscope:MARKer:PPEak
Options Not Applicable.
MARKer:POSition
Description Sets/queries the MARKer POSition. This is the number of divisions from the left side of
the graticule to the marker.
Syntax OSCilloscope:MARKer:POSition?
OSCilloscope:MARKer:POSition <real> | [:FNUM]
Options Refer to Appendix B.