User`s guide

23-4
Measurement Sync Subsystem
BURSt:TYPE
BURSt:TYPE
Description Selects/queries the MSYNc BURSt TYPE for the selected burst number
Note: this selects the type for both MSYN:BURSt:TYPE<n> and
DDEMod:BURSt:TYPE<n>.
Syntax MSYNc:BURSt:TYPE<n>?
MSYNc:BURSt:TYPE<n> <string>
Options where <n> = 0 to 3.
’TSC0’ | ’TSC1’ | ’TSC2’ | ’TSC3’ |
’TSC4’ | ’TSC5’ | ’TSC6’ | ’TSC7’ |
’RACH’ | ’SCH’ | ’FCH’ | ’USER DEF’
BURSt:UDSPattern
Description Sets/queries the MSYNc User Defined Sync Pattern definition for the selected burst number
Syntax MSYNc:BURSt:UDSPattern<n>?
MSYNc:BURSt:UDSPattern<n> <quoted string>
Options where <n> = 0 to 3.
SYNC:BSELect
Description Selects/queries the burst selection to synchronize measurements to.
Syntax MSYNc:SYNC:BSELect?
MSYNc:SYNC:BSELect <string>
Options ’0’ | ’1’ | ’2’ | ’3’ | ’EXT’
Where;
• 0 means always sync to burst number 0.
• 1 means always sync to burst number 1.
• 2 means always sync to burst number 2.
• 3 means always sync to burst number 3.
• EXT means use external signals to decide which burst number to sync to.