User`s guide

23-3
Measurement Sync Subsystem
BURSt:LENGth
BURSt:LENGth
Description Selects/queries the MSYNc user-defined BURSt LENGth for the selected burst number
Syntax MSYNc:BURSt:LENGth<n>?
MSYNc:BURSt:LENGth<n> <string>?
Options where <n> = 0 to 3.
‘87’ | ‘147’
BURSt:SPSPosition
Description Sets/queries the MSYNc user-defined Sync Pattern Start Position for the selected burst
number
Syntax MSYNc:BURSt:SPSPosition<n>?
MSYNc:BURSt:SPSPosition<n> <integer> | [:INUM]
Options where <n> = 0 to 3.
Refer to Appendix A.
BURSt:TQUalifier
Description Selects/queries the Trigger QUalifier for the selected burst number
Note: this selects the trigger qualifier for both
MSYNc:BURSt:TQU<n> and DDEMod:BURSt:TQU<n>.
Syntax MSYNc:BURSt:TQUalifier<n>?
MSYNc:BURSt:TQUalifier<n> <string>
Options where <n> = 0 to 3.
’NORMAL’ | ’RF POWER’
Where;
• NORMAL means no trigger qualifier.
• RF POWER means ’rearm for another trigger if RF POWER never came up’.