User`s guide

17-3
Fast Bit Error Test
BITS
BITS
Description Sets/Queries the number of bits used during a measurement.
Syntax FBETest:BITS?
FBETest:BITS <integer> | [:INUM]
Options Refer to Appendix A.
LOOPback:LDELay
Description Sets/Queries the loopback delay.
Syntax FBETest:LOOPback:LDELay?
FBETest:LOOPback:LDELay <integer> | [:INUM]
Options Refer to Appendix A.
The integer value being 0 to 26.
LOOPback:LDELay:MODE
Description Sets/Queries the loopback delay mode.
Syntax FBETest:LOOPback:LDELay:MODE?
FBETest:LOOPback:LDELay:MODE <string>
Options Where;
• AUTO automatically sets LDELay (above) once when the measurement is started. This
is a timing calibration action.
• MANUAL means the Loop DELay is controlled manually via the :LDELay command.
FORMat
Description Sets/Queries the data format to be Random Speach Frames or Random Bursts.
Syntax FBETest:FORMat?
FBETest:FORMat <string>
Options Not Applicable.