User`s guide

15-5

DSP Analyzer Commands (Measure Subsystem)

[:AMPLitude]:MARKer:LEVEL:MID

Description Sets/queries the AMPLitude MARKer MID trace attributes.

Queries the AMPLitude MARKer MID trace level which is relative amplitude data. This

value is a function of the mid trace marker position set/queried by

DSP:AMPL:MARK:POS:MID. This is only valid when on IMPORTANT: The user

MUST be on the Amplitude MID screen to query this result (DISP:DSP:VIEW ’AMPL

MID’).

GPIB unit is dB.

Display unit is dB.

Syntax MEASure:DSPanalyzer[:AMPLitude]:MARKer:LEVel:MID?

MEASure:DSPanalyzer[:AMPLitude]:MARKer:LEVel:MID[:MM] | [:AVG]

Options Refer to Appendices D and F.

[:AMPLitude]:MARKer:LEVEL:RISE

Description Sets/queries the AMPLitude MARKer RISE trace attributes.

Queries the AMPLitude MARKer RISE trace level which is relative amplitude data. This

value is a function of the rise trace marker position set/queried by

DSP:AMPL:MARK:POS:RISE. This is only valid when on IMPORTANT: The user

MUST be on the Amplitude RISE screen to query this result (DISP:DSP:VIEW ’AMPL

RISE’).

GPIB unit is dB.

Display unit is dB.

Syntax MEASure:DSPanalyzer[:AMPLitude]:MARKer:LEVel:RISE?

MEASure:DSPanalyzer[:AMPLitude]:MARKer:LEVel:RISE[:MM] | [:AVG]

Options Refer to Appendices D and F.