User`s guide

13-3
DISPlay Subsystem
[:SCReen]
[:SCReen]
Description Selects/queries the screen to activate, display and perform any necessary screen transitional
functionality.
Syntax DISPlay[:SCReen]?
DISPlay[:SCReen] <enumerated type / string>
Options AFANalyzer | BER | BER1 | BER2 | CELL | CELL1 | CELL2 | CCONfigure | CONFigure
| CWAFanalyzer | CWANalyzer | DDEMod | DSPanalyzer | IOConfigure | FBER |
FTCPower | HELP | HOPControl | LOGGing | MESSages | MSYNc | MSINfo |
ORFSpectrum | OSCilloscope | PULSe | RFANalyzer | RFGenerator | SANalyzer | SERVice
| SMSCb | TCONfigure | TESTs | TFReq | TSPec | TSEQ | TPAR | TIB
BETest:MNUMber:LEFT
Description Selects/queries the Bit Error Test Measurement NUMber to DISplay on the LEFT side of
the screen.
Syntax DISPlay:BETest:MNUMber:LEFT?
DISPlay:BETest:MNUMber:LEFT <string>
Options ‘1’ | ‘3’
BETest:MNUMber:RIGHt
Description Selects/queries the Bit Error Test Measurement NUMber to DISplay on the RIGHt side of
the screen.
Syntax DISPlay:BETest:MNUMber:RIGHt?
DISPlay:BETest:MNUMber:RIGHt <string>
Options ‘2’ | ‘4’
CELL:SACCh:ACEL1
Description Selects/queries the SACCH Adjacent Cell measurements to DISPlay.
Syntax DISPlay:CELL:SACCh:ACEL1?
DISPlay:CELL:SACCh:ACEL1 <integer> | [:INUM]
Options Refer to Appendix A.